Hopper Spreaders
|
| |
 |
 |
- Fast-Cast 550 1/3 Yard
Spreader
- 3.75 HP Briggs & Stratton gasoline vertical
shaft engine
- Electric clutch spinner and conveyor control
- Light weight aluminum hopper
- Wear resistant bolt-on 304 stainless floor
- Rugged belt over chain conveyor system
- Adjustable conveyor take-up bearings
- Adjustable material deflectors
- Spreading width from 4 ft. to 24 ft.
- Tie down kit includes eye bolts and (4) ratchet
straps
- In-cab control panel (on/off motor switch and
on/off conveyor switch)
- 14" Spinner disc
- Adjustable material discharge gate
- Hopper weight capacity: 500 pounds
- Hopper weight empty: 250 pounds
|
- 1TS17, 1TS17A, 1TS25
and 1TS25A Spreader
- Electric start/electric choke
- Electric throttle
- Battery
- 14 Ga. steel hopper
- Heavy Duty top screen
- 5 HPTecumseh Engine
- Honda engines available
- 3 Gussets (each side)
- 4" formed channels
- Balancing lifting eye
- In-cab controls with quick disconnect cab and
engine harness
- Adjustable chute deflectors
- 4 hold down nylon/ratchet straps
- Rock hard powder coated finish or premium
stainless steel
|
 |
 |
| |
 |
| |
Innovative
Hydraulic Drive System |
- Quiet hydraulic drive
- Smooth fluid power
- Low maintenance
- Overload protection
- NO belts and pulleys
- NO chains and sprockets
- NO broken chains
- NO
sheer pins
|
|
Sno-Pro Polyethylene Spreader |
| • |
Capacity |
1.84 Yard |
2.1 Yard |
| • |
Overall length |
101" |
117" |
| • |
Overall width |
49" |
49" |
| • |
Overall height |
37" |
37" |
| • |
Hopper length |
86" |
102" |
| • |
Hopper height |
37" |
37" |
| • |
Hopper angle |
40 deg. |
40 deg. |
| • |
Conveyor width |
12" |
12" |
| • |
Gate dimension |
8" x 8" |
8" x 8" |
| • |
Approximate weight |
400 lb |
450 lb |
| • |
Material |
Polyethylene |
Polyethylene |
| • |
Gauge |
0.312" |
0.312" |
| • |
Electric Motor |
3/4 HP 12 V.D.C. |
3/4 HP 12 V.D.C. |
|
 |
In-Cab Controls,
made for safe,
comfortable operation |
| |
